PRODUCTS:
CGL Aluminium Capping System

The CGL Capping System has the following benefits:-

No fixings pierce the capping which is thus allowed to move freely to cope with expansion stresses. This avoids unsightly distortion of the capping and removes the danger of leaks due to failed capping fixings

Joints are securely waterproofed by the profiled nature of the support extrusion. The system does not rely upon site-applied mastic seals but upon the proven engineering technology of the design

The CGL system is capable of coping with design wind pressures by variation of metal thickness and bracket placement

The system is easy and quick to install. All necessary components are supplied to support, seal, level, and silence the finished capping. The Contractor can install the capping from the roof without the necessity of provision of expensive scaffolding

All materials are compatible, corrosion-free, lightweight, and simple to disassemble and repair if damaged n Cappings are available in coil-coated, powder coated or anodized alluminium.

Standard Details
These are the standard shapes and details of our system. For non-standard applications, profiles, or arrangements, please contact our technical department.

CGL Capping System incorporates the following components:-
1. 1.6 - 3.0mm thick aluminium capping.
2. 'B 84' aluminium extrusion which doubles as a support strap and also as a jointing strap.
3. Neoprene 'anti-rattle' extrusion fitted to aluminium support/joint extrusion.
4. PVC serrated levelling pieces.