NBS Logo
Skip to content

Gutter systems

Insulated & Membrane-Lined Gutters Explained

By the CGL Systems technical team · Updated

Quick answer

An insulated gutter is a box or valley gutter with insulation (usually PIR or mineral wool) built in beneath a watertight liner, so the gutter keeps the roof's thermal line instead of breaking it. Internal gutters on heated buildings normally need insulating to avoid heat loss, cold bridging and condensation dripping into the building.

Why do internal gutters need insulating?

A valley or box gutter sits inside the building envelope, so an uninsulated gutter leaves a cold strip running the length of an otherwise insulated roof.

That causes three problems:

  • Heat loss through the gutter, which counts against the building's thermal performance under Building Regulations Part L (England and Wales) and Section 6 (Scotland).
  • Cold bridging at the junction between roof and gutter.
  • Condensation: warm, moist air meets the cold underside of the gutter and condenses, dripping into the building. This is often mistaken for a gutter leak.

What is a membrane-lined gutter?

A membrane-lined gutter is a steel gutter with a single-ply waterproof membrane bonded to it, so the membrane forms the watertight surface and joints instead of mastic and rivets.

CGL invented and patented the membrane-lined gutter in 1980, in both single-skin and insulated form, in response to demand for more thermally efficient buildings. CGL's unique overlap joint detail reduces the number of joints by 50%, saving time on site and removing potential leak points.

Single-skin vs insulated gutters

Single-skin membrane-linedInsulated membrane-lined
ConstructionSteel gutter + membraneSteel outer + insulation + steel liner + membrane
UseUnheated buildings, external or parapet gutters outside the thermal lineInternal box and valley gutters on heated buildings
Thermal performanceNone addedContinues the roof's insulation line
CGL productCGL Single guttersCGL Insulated gutters

PIR or mineral wool insulation?

CGL insulated gutters can be supplied with PIR or mineral wool to suit the project.

  • PIR gives higher thermal performance for a given thickness, so the gutter can be shallower or achieve a better U-value.
  • Mineral wool is non-combustible and is often chosen where the fire strategy or building type calls for it.

The choice should match the roof build-up and the project's fire and thermal requirements.

What to look for in an insulated gutter system

  • Thermal continuity with the adjacent roof panels or built-up roof
  • Fewer joints: CGL supplies 3 m lengths as standard, factory-jointed to 6 m where needed
  • Load capacity for foot traffic, snow, standing water and wind uplift
  • Warranty and life expectancy: CGL membrane-lined gutters have a 40+ year life expectancy and a 25-year warranty available on request
  • Drainage design: the gutter still needs to be sized for the roof (see our sizing guide)

Frequently asked questions

What is an insulated gutter?

An insulated gutter is a box or valley gutter with insulation built into its construction beneath a waterproof liner. It continues the roof's insulation across the gutter, preventing heat loss and condensation.

Do valley gutters need to be insulated?

On heated buildings, internal valley and box gutters normally need insulating, as an uninsulated gutter creates a cold bridge, adds heat loss and can cause condensation to drip into the building.

What is a membrane-lined gutter?

A steel gutter with a bonded single-ply membrane that forms the watertight surface and joints. CGL invented and patented membrane-lined gutters in 1980.

Is my gutter leaking or is it condensation?

If water drips from the gutter in dry, cold weather or inside a warm, humid building, it is likely condensation on an uninsulated gutter rather than a leak. Leaks are usually linked to rainfall.

What insulation is used in insulated gutters?

Typically PIR (polyisocyanurate) board for higher thermal performance, or mineral wool where non-combustibility is required. CGL insulated gutters can be supplied with either.

Free gutter drainage calculations

CGL designs and manufactures industrial and commercial gutter systems and carries out gravity drainage calculations in-house, free of charge. Send us your roof drawings and we'll size the gutter, outlets and overflows for you.

Get in touch Download area
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.